Home » Products» 12W Power Adapter
Products
12W Power Adapter
RFID NFC Anti-metal tamper detection TAG-HY150163A
RFID NFC Anti-metal tamper detection TAG-HY150163A
  • Free Charge RFID Solution According To Real Application System

  • Security solution banking check,encryption ticket, money bag

  • Confidential documents,service authrization,mobility payment

  • Truck tracking,vehicle parking,electronic toll collection ETC

  • Asset trace,transportation,fuel gas petrol station,power electric meter

  • Access control,liquor & wine tracking,telecom communication

  • NFC powerless LED light,animal wearable management

Product Feature / Product Advantage
  • Product Support Worldwide Input Voltage 

  • Product Comply with CCC, CE, UL, CUL, GS, RoHS, FCC, GS, CB, TUV, SAA, KC, PSE standards

  • Pass LPS, 100% full load burn-in test

  • Fully enclosed plastic case

  • LED indicator for power on

  • FireProof, Dust-Proof, Moistureproof

  • High Temperature resistance,Over temperature protection

  • Over voltage protection, Over current protection

  • Short circuit protection, Overload protection

  • Lightning protection, Electromagnetic fied protection

  • MBFT: > 50,000Hours (Repare rate per year<0.08%)

  • No load power consumption < 0.3W,

  • In-rush Input Current(A): 30A Max for less than 30Watt / 100A Max for 30Watt+

  • Inrush Output Current(A): 1.5-2.0 times Amp of the Rated Current

Value Added Services
  • 100% quality control to be sure you have unique TID UID EPC numbers in the world from our production(Just For inlay, label).

  • Especially Focusing on Non-transfer, Non-removal, Break On Removal, Tamper proof, One Time Seal, Disposable Anti-Destructive Function Technology

  • Frequency performance graphic is controlled 100% for your needs according to a special RF standard area and performance improvement, customized antenna printing & personalization individual printing service like Barcode,Serial No, Text Contents and so on.

  • Customized Chip Design Supported associated to Security Encryption Purpose, There's DNA, AES 128 secure protection lock, Defined User memory, Die Chip Pad specified, Trigger PAD is enable, GPIO managed, Sensor Controller Buildin and so on.

  • Customized System Research & Development  like Data Service including Chip pre-programing, Data Write, Adhesiveness, Durability, Memory Format, TID/UID Encoding, EPC Encoding, User Encoding, Password Protect, Kill itself such as tamper evidence, authenticity protection, personalization, encoding, access passwords, report uploading & downloading assistant.

  • Provide Free Charge RFID Solution Depending On Your Special Requirements for Real Application System, like the security solution of banking check, encryption entrance ticket, money bag, confidential documents, service authrization, mobility payment, truck managment tracking, vehicle parking, electronic toll collection ETC, asset trace, transportation, fuel gas petrol station, power electric meter, access control, liquor & wine drinking tracking, telecom communication, NFC powerless LED par light, domestic bird/animal management and so on

Application
  • Widely used for cover bottle seal like electric meter, water meter, to avoid people steal power free charge and lost money, security authorization tracking, other one for metal cabinet box seal supervision management purpose

  • Vehicle car automatic parking Lot, electronic toll collection of high speed way, Certification license card ticket, environmental license automatic parking lot, to control traffic,speeding violation identification,vehicle annual inspection

  • Logistics supply chain,digital warehouse management,value-added security traceability,bags and suitcase, warehouse stock, container,goods shelf, pallet, equipment, assets, communication equipment, medical device and clothing management etc.

  • NFC wearable products, electronic toys, Game Toy & Arts, home entertainment application, wearable smart application and insert application, other dangerous and safety items identification like drugs,medicine cosmetics,food,tobacco,wine,alcohol liquor and drinking. accessories and other spare parts or items as well as some embedded applications for security and trace-ability.

  • Sometimes just have them as a law material and pass to next production like lamination, inserting or die-cut process, mostly process is made from dry inlay, wet inlay to be a finished label or finished tag, can't be direct used for a special application. Few direct application of this kind of wet or dry inday is for demostration of warehouse inventory tracking.

Guarantee
  • Exclusive Design & Patent Technology

  • Factory Quality Service

  • Support OEM, ODM & SKD services,acccept from the processing of Etching, Flip-chip Assembly, Lamination, Die-cut, Program Encoding ( TID/UID, Serial Number, Barcode , Associated All of the related Datas )

  • Free Samples Provided existing in warehouse

  • Good Price & competitively

  • Customized Depending On Requirement

  • Customized Antennna,Inlay,Label Design to Required System

  • Confidential Security Product Structure Design & Evaluation

  • Free Charge Analysis & Simulate Performance Character

  • Free Charge Solution Consulting Including fine Tuning

  • Free Provide Workflow of Tag , Inlay and Antenna production  

  • Free Charge User Manual Instruction To Special Requirement

Payment
  • Payment Term: T/T, Western Union & Paypal.

  • Quick customized sample providing of 3-7 days, low cost.

Packaging Shipping
  • Packaging Defined of your needs, Normally supply roll by roll (some specified tag can be piece by piece ) , 2000-5000 pcs roll/bag & Paper Carton.

  • Shipping Method & Delivery Time: Fastest 8-12 business days by DHL,UPS,FedEx,EMS and so on couriers or sea-cargo air-cargo appointed from the customer.

Power Plug & Power Cable Connectors
  • AC Input Connector/Interface (optional)
  • power supply AC input Plug connector
  • AC Cable Type: Generally Pure Copper Wire, Cable length 1.5 meters,Color Black (customized is supported)
  • power supply AC input Plug connector
  • DC Output Connector/Interface (optional)
  • DC power supply connector plug
  • DC Power Plug : Select the suitable one you required (all are optional)
  • Universal DC plug/jack/connector as below parameters
    • Outer diameter * Inner diameter* Length (O.D*I.D*L), straight and right angle(micro usb,mini usb,more others you can specify)
    • DC Cable/Wire : Wire/Copper Type and cable length are customized (Normally 1.5 meters length, color black, pure copper)
  • DC power adapter connector
  • Output cable type: UL2468,UL2464,UL1185,SPT-1,SPT-2 ....
  • DC power socket power plug
Quality Inspection Rules
  • No load power consumption < 0.3W
  • Repare rate per year <0.08%
  • In-rush Input Current(A): 30A Max for less than 30Watt / 100A Max for 30Watt+
  • Inrush Output Current(A): 1.5-2.0 times Amp of the Rated Current
  • Load regulation: 5%
  • Output Voltage
    • Output Voltage Regulation
      • The total output voltage regulation shall be +/-5%,including the effects of line voltage variations,load current,ripple and noise,and the AC component of the load current.
    • Output Voltage Ripple
      • The switching power supply shall not exceed the minimum/maxinum limits in the indicated voltage for 60Hz or 50Hz ripple
      • switching frequency ripple and noise measured with 20MHz width.
      • Ripple and Noise:50/60Hz Ripple + Switching Ripple and Noise.
      • Ripple and Noise are measured at the end of output cables which are added a 0.1uF(104) Ceramic capacitor and a 22uF Electrolytic capacitor.
  • EFFICIENCY
    • When 115VAC line input voltage (100-240VAC), the efficiency shall be >78% at rating load.
  • DIELECTRIC STRENGTH (Hi-Pot) TEST
    • Finished product withstands with AC 3000Vrms/50Hz,5mA max,
    • Primary to secondary,1 minute for type test,1 second for production test.
  • INSULATION RESISTANCE:
    • Primary to secondary: 10Mmin at 500VDC.
  • PROTECTION:
    • Short Circuit Protection
      • If short circuit occurs,all the output should be protected. After the fault, the adapter automatically recovers.
    • Over Shoot
      • The Output over shoot at turn-on shall not exceed 10% of normal voltage value with or without the load connected.
    • Start-up time
      • The start-up time is less than 2 second.
  • ENVIRONMENTAL CONDITIONS:
    • Temperature
      • Operating temperature: -20 to +60
      • Storage temperature: -20 to +85
    • Humidity
      • Relative humidity95%
    • Operating Ambient Altitude
      • Altitude:0-3000m
    • Operating at the lower temperature
      • At -20,with the rated voltage 100-240Vac charged to the primary and unloaded and full load on the secondary 8 hours, no abnormality in electric and mechanical characteristic, after 2 hours recovery at the room temperature.
    • Operating at the high temperature
      • At +60,with the rated voltage 100-240Vac charged to the primary and unloaded and full Load on the secondary 8 hours, no abnormality in electric and mechanical characteristic, after 2 hours recovery at the room temperature.
    • COOLING
      • Cooling shall be with natural convection cooling.
  • Product Durability Test / Reliability Test
    • Burn-in
      • The burn-in test will be performed at least 4 hours at centigrade degrees under full load Condition.
    • Vibration and shock
      • No Evidence of any mechanical or functional damage after the vibration and shock testing.
      • Test conditions Acceptance Criteria
        Frequency 10-55Hz Nominal functional test should be satisfied after the test
        Sweep For each axis(X,Y,Z)
        Displacement 0.15mm
        Periodicity 10
    • Drop test
      • After Dropping from a hight of 100 cm onto a wooden floor , Dropping at 6 sides totally, NO breakage should be happened in the test piece.
    • Bending Test
      • Fix the power supply and its plug, apply a load of 200g to the other end, turn the cable by +/-60 carry out this process 1000 times, at the rate of 20 times per minutes. No abnormality in mechanical and electrical Characteristic and disconnection within 30% after the test.
    • MBFT: > 50,000Hours
  • Reference Standard Qualified / Compliance Test:
    • EMI Standards
      • Reference EN50082-1EN55022-BGB-17625.1-2003 GB-9254-1998
    • Safety Standards
      • The power supply unit shall meet certification with the following safety standards.
      • UL60950-1,EN60950-1,GB4943-2001UL60950-1,EN60950-1,GB4943-2001, K 60950-1(2011-12), IEC60335-2-292002 ,EN61558-2-162009+A1 ,IEC61347-2-132014 , UL60950-1 ,GB4943.1-2011 ,UL1310 , GB8898-2011
After Service & Guarantee
  • In order to provide you the right product and make you satisfied, more details are welcome to have a better solution.
  • The cheapest best shipping term and freight cost will be advised for consideration before your order.
  • Packing info will be provided before shipment to make things under control.
  • We are the one factory all produced in house including spare parts.
  • Support OEM, ODM & SKD orders from Printed Circuit Board, Layout modification, Appointed specified IC, customized body.
  • Free Samples Provided In case they are existed in warehouse.
  • Good Price & competitively.
Quality Guarantee for Power Adapter Power charger Quality Guarantee for Power Adapter Power charger Quality Guarantee for Power Adapter Power charger Quality Guarantee for Power Adapter Power charger Quality Guarantee for Power Adapter Power charger
Certifications
  • Power Adapter/Power Charger were passed CE certification, UL certification, FCC certification, GS certification, CB certification, SAA certification, PSE certification, KC certification, CCC certification.
  • EMI Certification, EMC certification, RoHS certification, TUV certification, PSE Certifications and so on other special certifications. We offer one stop of certification to the special requirement accordingly.
  • Most of new certification will take 3-4 weeks including sample produce.
Payment Term
  • Payment Method: T/T, Western Union & Paypal in advance, other terms will be discussed in the feature.
  • Fast Sample of the customized power supply, we will offer within 3-7 days with low price or free charge.
Quality Control Points of the Standard Workflow
Quality Inspection of power adapters
Packaging & Shipping
  • Packaging is appointed by your needs, Normally one unit of power supply packed in one smallest paper box.
  • 10-20pcs power supply units will be packed in one bigger paper carton.
  • 20-80pcs bigger cartons will be stacked in a pallets with plastic overlay film for cargo purpose.
  • Delivery by manual or Lift truck to the container or to the truck.
  • Fast Delivery Time: 8-12 workdays, by DHL, UPS, FedEx, EMS
  • Normally Air-Cargo, Sea-Cargo most are with good price under container shipment.
shipment of power supply
Frequently Asked Questions/FAQ
  • Q: Do you offer samples for testing?

    A: Yes,we offer samples for testing with free charge or low cost depends on design.Besides we welcome our customers to take sample as we believe what seeing is believing. Buyer have to pay shipping cost by yourself if free sample is offered.

  • Q:Do you have warranty?

    A :Yes,we have general warranty of 1 year period and maximum 5 years depends.

  • Q:Do you have certificates for your products?

    A:Yes,we have worldwide certifcaition such as UL/CUL,FCC,RoHS,CE,KC,SAA,TUV GS PSE Certifications.

  • Q:Can you produce or design the ODM based on our design?

    A: Yes, we will do that what you are requested design or the products. one week make up sample. 30days sample test 45days start to MP.

  • Q:Can you print our logo on the power supply or the product labels?

    A: yes,We provide OEM also, MOQ will be 500units.

  • Q:What's the main product of you factory?

    A: Our Major product is 0-100W global power adapter power charger, including wall plug adapter,USB adapter/USB charger,desktop adapter, metal case power adapter,led power driver, waterproof power adapter,led driver,open frame power adapter and etc.

You May Interested - Products Video:
You May Like - Power Adapters Power Chargers:
Application Related With This Power Adapter/Power Charger

News Related With This Power Adapter / Power Charger